Cisco Nexus 7000 Series Command Reference Manual page 377

Show Commands
show mpls switching aggregate ipv6
To display the IPv6 aggregate-related information, use the show mpls switching aggregate ipv6
command.
Syntax Description detail
vrf
vrf name
Defaults None
Command Modes EXEC
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the IPv6 aggregate-related information for a VRF instance:
switch# show mpls switching aggregate ipv6 detail vrf vrf1
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls switching aggregate ipv6 {detail vrf vrf name | vrf vrf name}
Displays the detailed information.
Displays the virtual routing and forwarding (VRF) instance.
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls switching aggregate ipv6
1299