Cisco Nexus 7000 Series Command Reference Manual page 345

Show Commands
Sequencing: receive disabled, send disabled
Bindings
Rx Counters
Tx Counters
Related Commands Command
show l2vpn atom
OL-24994-01
BFD dataplane status received
BFD peer monitor status received
Status received from access circuit
Status sent to access circuit
Status received from pseudowire i/f
Status sent to network peer
Status received from network peer
Adjacency status of remote peer
Parameter Local
------------ ------------------------------ ------------------------------
Label unassigned
Group ID unknown
Interface unknown
MTU unknown
Control word off (configured: autosense)
PW type unknown
VCCV CV type unknown
VCCV CC type unknown
Status TLV enabled
0 input transit packets, 0 bytes
0 drops, 0 seq err
0 output transit packets, 0 bytes
0 drops
Description
Displays the Any Transport over MPLS (AtoM) information.
: Not sent
: No fault
: DOWN(hard-down, not-ready)
: Not sent
: No fault
: No status
: None (no remote binding)
: None (no remote binding)
Remote
unassigned
unknown
unknown
unknown
unknown
unknown
unknown
unknown
None (no remote binding)
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show l2vpn atom vc detail
1267