Cisco Nexus 7000 Series Command Reference Manual page 220

neighbor
neighbor
To configure neighbor parameters, use the neighbor command. To return to the default setting, use the no
form of this command.
Syntax Description
ip-address
implicit-withdraw
labels
accept
prefix-list
targeted
Defaults None
Command Modes LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the prefix list to be used to filter label bindings for the specified
LDP neighbor:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# neighbor 10.12.12.12 labels accept p1
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1172
neighbor ip-address {implicit-withdraw | labels accept prefix-list | targeted}
no neighbor ip-address implicit-withdraw | labels accept prefix-list | targeted}
IP address for the Label Distribution Protocol (LDP) neighbor.
Specifies the LDP Implicit Withdraw Label.
Specifies the label binding exchange controls.
Specifies the label bindings to accept.
Name of the prefix list.
Specifies the targeted session.
Modification
This command was introduced.
Description
Protocol (LDP).
N Commands
OL-24994-01