Cisco Nexus 7000 Series Command Reference Manual page 318
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
show ip prefix-list
show ip prefix-list
To display the contents of all current IP prefix lists or of a specified prefix list, use the show ip prefix-list
command.
Syntax Description
prefix-list
Defaults
None
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
It is important that you enter this command to see how the prefix list is defined; otherwise, you cannot
verify MPLS label filtering.
This command requires the MPLS Services license.
Examples
This example shows how to display the contents of all current IP prefix lists:
switch(config)# mpls ldp configuration
switch(config-ldp)# show ip prefix-list p1
switch(config-ldp)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1240
show ip prefix-list [prefix-list]
(Optional) Prefix list. The maximum length is 63 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01
Advertisement
Table of Contents
