Cisco Nexus 7000 Series Command Reference Manual page 276

set mpls experimental imposition
set mpls experimental imposition
To set the value of the Multilprotocol Label Switching (MPLS) experimental field on all imposed label
entries, use the set mpls experimental imposition command. To return to the default setting, use the no
form of this command.
Syntax Description
mpls-exp-value
Defaults
None
Command Modes Address family configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to create a policy map to set the EXP field to a value of 3 on all imposed labels
of an MPLS header:
switch# configure terminal
switch(config)# policy-map Policy1
switch(config-pmap-qos)# class Class2
switch(config-pmap-c-qos)# set mpls experimental imposition 3
switch(config-pmap-c-qos)# end
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1208
set mpls experimental imposition mpls-exp-value
no set mpls experimental imposition mpls-exp-value
Policy map to set the EXP value on all imposed labels of an MPLS header.
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01