Encapsulation Mpls - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
E Commands
encapsulation mpls
To specify the Multiprotocol Label Switching (MPLS) encapsulation for a pseudowire port profile, use
the encapsulation mpls command.
Syntax Description
This command does not have any arguments or keywords.
Defaults
None
Command Modes
config-if- prof configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to specify the MPLS encapsulation for a pseudowire port profile:
switch# configure terminal
switch(config)# port-profile type pseudowire AToM
switch(config-if-prof)# encapsulation mpls
switch(config-pseudowire-mpls)#
Related Commands
Command
interface pseudowire
port-profile type
pseudowire
state enabled
OL-24994-01
encapsulation mpls
Modification
This command was introduced.
Description
Enters interface pseudowire configuration mode and configures a static
pseudowire logical interface.
Enters interface port-profile configuration mode and configures a
pseudowire port profile.
Enables the interface port profile.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
encapsulation mpls
143
Advertisement
Table of Contents
