Cisco Nexus 7000 Series Command Reference Manual page 372

show mpls switching
show mpls switching
To display the contents of the Multiprotocol Label Switching (MPLS) Unified Label Information Base
(ULIB), use the show mpls switching command.
Syntax Description ipv4-prefix
ipv6-prefix
Defaults None
Command Modes EXEC
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(5) and higer
including 6.1(1)
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the MPLS label switching database:
switch(config)# show mpls switching
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
In-Label Out-Label FEC name Out-Interface Next-Hop
VRF default
106 3 10.1.1.2/32 Eth2/19 19.20.0.2
106 None 10.1.1.2/32 Eth2/9 9.10.0.2
VRF vpn1
101 None 92.168.1.0/24 Eth2/26.1 110.0.1.2
VRF vpn2
100 None 92.168.2.0/24 Eth2/26.2 110.0.2.2
VRF vpn3
102 None 92.168.3.0/24 Eth2/26.3 110.0.3.2
VRF vpn4
103 None 92.168.4.0/24 Eth2/26.4 110.0.4.2
VRF vpn5
104 None 92.168.5.0/24 Eth2/26.5 110.0.5.2
VRF vpn6
105 None 92.168.6.0/24 Eth2/26.6 110.0.6.2
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1294
show mpls switching {ip prefix | ipv6 prefix}
Specifies the IPv4 prefix or mask.
Specifies the IPv6 prefix or mask.
Modification
Changed the command output.
This command was introduced.
Show Commands
OL-24994-01