Cisco Nexus 7000 Series Command Reference Manual page 179

M Commands
mdt default
To configure the default multicast distribution tree (MDT) for a virtual routing and forwarding (VRF),
use the mdt default command. To return to the default settings, use the no form of the command.
Syntax Description address
Defaults None
Command Modes
Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure the default MDT for a VRF:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt default 232.0.0.1
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
OL-24994-01
mdt default group-address
no mdt default group-address
IP multicast group address.
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mdt default
1131