Ip Rsvp Authentication Challenge - Cisco Nexus 7000 Series Command Reference Manual

ip rsvp authentication challenge

ip rsvp authentication challenge
To configure the Resource Reservation Protocol (RSVP) to use a challenge handshake on an interface,
use the ip rsvp authentication challenge command. To disable the authentication on an interface, use
the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure RSVP to use a challenge handshake on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# ip rsvp authentication challenge
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
188
ip rsvp authentication challenge
no ip rsvp authentication challenge
Modification
This command was introduced.
Description
Protocol (LDP).
I Commands
OL-24994-01