Cisco Nexus 7000 Series Command Reference Manual page 391

Show Commands
show mpls traffic-eng high-availability
To display the Multiprotocol Label Switching (MPLS) traffic engineering (TE) high availability
information, use the show mpls traffic-eng high-availability command.
Syntax Description database
shared-database
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the MPLS TE shared database:
switch# show mpls traffic-eng high-availability shared-database
Local Link Ethernet2/2
OL-24994-01
show mpls traffic-eng high-availability{database | shared-database}
Displays the MPLS TE checkpoint database.
Displays the MPLS TE shared database.
Modification
This command was introduced.
I/F IOD 0x1a081000, Area 2, Protocol IS-IS, Node Type Router
Flags 0xbaeeb:
Rtr_Id, Area, Proto, Handle, Addr, Nbr_ID, Adm_Wt,
Max_BW, Max_Res, Max_ResSub, TX_BW_Un, Affin, Sub_T, IGP_Wt,
System Id 0001.0001.0001.00, TE Router Id 10.1.1.1
IP Address 12.12.1.2
Neighbor: Protocol IS-IS, Node Type Network
System Id 0001.0001.0002.00, IP Address 0.0.0.0
TE Metric 4294967295, IGP Metric 400
Link Max: BW 1262402592, Reserved 0, Reserved Subpool 0
Affinity 0, Subnet Type Broadcast
Pri Pool 0 BW (kbps)
--- ----------------
0 0
1 0
2 0
3 0
4 0
5 0
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls traffic-eng high-availability
1313