Cisco Nexus 7000 Series Command Reference Manual page 203

M Commands
mpls ldp sync
To enable Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) and Interior
Gateway Protocol (IGP) synchronization for all Open Shortest Path First (OSPF) interfaces, use the mpls
ldp sync command. To return to the default setting, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Router configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to enable MPLS LDP and IGP syncronization for all OSPF interfaces:
switch# configure terminal
switch(config)#
switch(config-router)# mpls ldp sync
Related Commands Command
mpls ldp igp sync
OL-24994-01
mpls ldp sync
no mpls ldp sync
Modification
This command was introduced.
p1
Description
Allows Label Distribution Protocol (LDP) Interior Gateway Protocol (IGP)
Synchronization on this interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls ldp sync
1155