Ip Rsvp Authentication Key-Chain - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip rsvp authentication key-chain

To activate the Resource Reservation Protocol (RSVP) cryptographic authentication on an interface, use
the ip rsvp authentication key-chain command. To disable the authentication on an interface, use the
no form of this command.
Syntax Description
key-chain-name
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to activate RSVP cryptographic authentication on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# ip rsvp authentication key-chain key1
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
ip rsvp authentication key-chain key-chain-name
no ip rsvp authentication key-chain key-chain-name
Key chain name.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
ip rsvp authentication key-chain
189