Fast-Reroute Backup-Prot-Preempt Optimize-Bw - Cisco Nexus 7000 Series Command Reference Manual

fast-reroute backup-prot-preempt optimize-bw

fast-reroute backup-prot-preempt optimize-bw
To change the backup protection preemption algorithm from minimizing the number of label switched
paths (LSPs) that are demoted to minimizing the amount of bandwidth that is wasted, use the
fast-reroute backup-prot-preempt command.
Syntax Description This command has no arguments or keywords.
Defaults A minimum number of LSPs are preempted
Command Modes
MPLS traffic engineering global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to change the backup protection preemption algorithm from minimizing the
number of LSPs that are demoted to minimizing the amount of bandwidth that is wasted:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# fast backup-prot-preempt optimize-bw
switch(config-te)#
Related Commands Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
152
fast-reroute backup-prot-preempt optimize-bw
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
protocol (MPLS-TE).
F Commands
OL-24994-01