Cisco Nexus 7000 Series Command Reference Manual page 182

mdt pim hello-interval
mdt pim hello-interval
To configure the hello interval used between peers, use the mdt pim hello-interval command.
Syntax Description interval
Defaults
30000 milliseconds
Command Modes Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure the hello interval used between peers:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt pim hello-interval 30000
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1134
mdt ip pim hello-interval interval
no mdt ip pim hello-interval interval
Interval in milliseconds. The range is from 3000 to 18724286.
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
M Commands
OL-24994-01