I Commands
interface tunnel-te
To configure a traffic engineering (TE) interface, use the interface tunnel-te command. To restore the
system to its default condition, use the no form of this command.
Syntax Description
number
Defaults
None
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure a TE interface:
switch# configure terminal
switch(config)# interface tunnel-te 65
switch(config-if-te)#
Related Commands
Command
None
OL-24994-01
interface tunnel-te number
no interface tunnel-te number
Traffic engineering interface number. The range is from 0 to 65503.
Modification
This command was introduced.
Description
There are no related commands.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
interface tunnel-te
183