Feature Mpls L3Vpn - Cisco Nexus 7000 Series Command Reference Manual

feature mpls l3vpn

feature mpls l3vpn
To enable the Multiprotocol Label Switching (MPLS) Layer 3 virtual private networks, use the feature
mpls l3vpn command. To return to the default setting, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Per VDC
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable the MPLS Layer 3 virtual private networks:
switch# configure terminal
switch(config)# install feature-set mpls
switch(config)# feature-set mpls
switch(config)# feature mpls l3vpn
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
158
feature mpls l3vpn
no feature mpls l3vpn
Modification
This command was introduced.
Description
Protocol (LDP).
F Commands
OL-24994-01