Cisco Nexus 7000 Series Command Reference Manual page 186
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
member
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to add an active Ethernet AC, with or without an EFP, to the context:
switch# configure terminal
switch(config)# interface ethernet 4/0/0.1
switch(config-if)# encapsulation dot1q 100
switch(config-if)# l2vpn xconnect context Test1
switch(config-xconnect)# internetworking ethernet
switch(config-xconnect)# member ethernet 4/0/0.1 service-instance 100
switch(config-xconnect)#
This example shows how to delete the member configuration:
switch(config-xconnect)# no member ethernet 4/0/0.1 service-instance 100
switch(config-xconnect)#
Related Commands
Command
internetworking
l2vpn xconnect context Enters Xconnect configuration mode and establishes a Layer 2 VPN
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1138
Description
Specifies the type of pseudowire and the type of traffic that can flow across
the network
(L2VPN) context for identifying the two members in a VPWS,
multi-segment pseudowire, or local connect service.
M Commands
OL-24994-01
Advertisement
Table of Contents
