Cisco Nexus 7000 Series Command Reference Manual page 317

Show Commands
show ip pim mdt send
To display the Protocol Independent Multicast (PIM) data multicast distribution tree (MDT) join send
information, use the show ip pim mdt send command.
Syntax Description detail
vrf
vrf-name
all
Defaults None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the data multicast distribution tree (MDT) join send information:
switch# show ip pim mdt send vrf all
MDT Data Groups Send List for vrf: vpn1
C-Source
10.0.0.1
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ip pim mdt send [detail] [vrf {vrf-name | all}]
(Optional) Displays the detailed information.
(Optional) Displays the virtual routing and forwarding (VRF) instance.
(Optional) VRF name. The maximum size is 32 alphanumeric characters.
(Optional) Displays the information for all VRFs.
Modification
This command was introduced.
C-Group
232.1.1.1
Description
Protocol (LDP).
MDT Source MDT Group
11.0.0.l 225.1.1.1
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip pim mdt send
Uptime
2d17h
1239