Cisco Nexus 7000 Series Command Reference Manual page 264

router isis
router isis
To configure an Intermediate System-to-Intermediate System (IS-IS) routing process, use the router isis
command. To return to the default setting, use the no form of this command.
Syntax Description
routing-process-tag
Defaults None
Command Modes Router configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure an IS-IS routing process:
switch# configure terminal
switch(config)# router isis p1
switch(config-router)#
Related Commands Command
tunnel-te interface
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1216
router isis routing-process-tag
no router isis routing-process-tag
Routing process tag. The maximum size is 20 alphanumeric characters.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
R Commands
OL-24994-01