Ip Rsvp Authentication Type - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip rsvp authentication type

To configure the algorithm used to generate crytpgraphic signature messages on an interface, use the ip
rsvp authentication type command. To return to the default settings, use the no form of this command.
Syntax Description
md5
sha-1
Syntax Description This command has no arguments or keywords.
Defaults
md5
Command Modes
Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure the algorithm used to generate crytographic signatures messages
on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# ip rsvp authentication type md5
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
ip rsvp authentication type {md5 | sha-1}
no ip rsvp authentication type {md5 | sha-1}
Specifies the Rivest, Shamir, and Adleman (RSA) Message Digest 5 hash
algorithm.
Specifies the National Institute of Standards and Technology (NIST) Secure
Hash Algorithm 1.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
ip rsvp authentication type
191