Cisco Nexus 7000 Series Command Reference Manual page 286

signalling hello reroute
signalling hello reroute
To reroute the use of hello messages, use the signalling hello reroute command. To disable the sending
of reroute hellos, use the no form of this command.
Syntax Description
This commands has no arguments or keywords.
Defaults OFF
Command Modes RSVP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the reroute hello messages:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling hello reroute
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1218
signalling hello reroute
no signalling hello reroute
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01