Cisco Nexus 7000 Series Command Reference Manual page 236

policy-map
policy-map
To configure a policy map, use the policy-map command. To return to the default setting, use the no
form of this command.
Syntax Description
type
qos
policy-map-name
Defaults None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure a policy map:
switch# configure terminal
switch(config)# policy-map policy1
switch(config-pmap-qos)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1188
policy-map [type qos] policy-map-name
no policy-map [type qos] policy-map-name
(Optional) Specifies the type of the policy map.
(Optional) Specifies the QoS policy.
Policy map name. The maximum size is 40 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
P Commands
OL-24994-01