Cisco Nexus 7000 Series Quick Start Manual
Replacing a dimm on an i/o module
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Advertisement
Quick Links
Replacing Memory on a Cisco Nexus
7000 Series I/O Module
Date: November 17, 2016
Part Number: 78-100406-01
This document describes how to replace the DIMM on a Cisco Nexus 7000 Series
I/O module.
Before you install, operate, or service the system, read the Cisco Nexus 7000
Note
Series Regulatory Compliance and Safety Information for important safety
information.
Replacing a DIMM on an I/O Module
To replace a DIMM on a Cisco Nexus 7000 Series I/O module, follow these steps:
Cisco Systems, Inc.
www.cisco.com
Advertisement
Related Manuals for Cisco Nexus 7000 Series
Summary of Contents for Cisco Nexus 7000 Series
- Page 1 Before you install, operate, or service the system, read the Cisco Nexus 7000 Note Series Regulatory Compliance and Safety Information for important safety information. Replacing a DIMM on an I/O Module To replace a DIMM on a Cisco Nexus 7000 Series I/O module, follow these steps: Cisco Systems, Inc. www.cisco.com...
- Page 2 Caution anything else from coming in contact with its circuitry. If you are removing the module from a Cisco 7010 chassis, rotate the module 90 Step 8 degrees counterclockwise so that it is horizontal and you can see the circuitry from above.
- Page 3 Step 10 Holding the edges of the DIMM with your fingers, slide it out of its memory slot Step 11 and place it in an antistatic bag. See Figure Replacing Memory on a Cisco Nexus 7000 Series I/O Module 78-100406-01...
- Page 4 Step 12 Holding the replacement DIMM by its edges, align it to the memory slot and push it into place until the spring clips click into the DIMM. See Figure Replacing Memory on a Cisco Nexus 7000 Series I/O Module 78-100406-01...
- Page 5 I/O module by screwing in all the 14 screws before proceeding to the next step. Grasp the front of the module with one hand and place your other hand under the Step 15 module to support its weight. Replacing Memory on a Cisco Nexus 7000 Series I/O Module 78-100406-01...
-
Page 6: Related Documentation
Verify that the module has 8 GB of memory by using the show system resources Step 20 command. If you need to replace the DIMM on another Cisco Nexus 7000 Series I/O module, Step 21 repeat Steps 2 through 18. - Page 7 Cisco Nexus 7000 Series NX-OS Verified Scalability Guide Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide Cisco Nexus 7000 Series NX-OS Virtual Device Context Quick Start Cisco NX-OS FCoE Configuration Guide for Cisco Nexus 7000 and Cisco MDS 9000 NX-OS Command References...
- Page 8 Cisco Nexus 7000 Series NX-OS System Management Command Reference Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference Cisco Nexus 7000 Series NX-OS Virtual Device Context Command Reference Cisco NX-OS FCoE Command Reference for Cisco Nexus 7000 and Cisco MDS 9500 Other Software Document...
-
Page 9: Obtaining Documentation And Submitting A Service Request
This document is to be used in conjunction with the documents listed in the section. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. - Page 10 Obtaining Documentation and Submitting a Service Request Replacing Memory on a Cisco Nexus 7000 Series I/O Module 78-100406-01...