Cisco Nexus 7000 Series Command Reference Manual page 334

show ip rsvp neighbor
show ip rsvp neighbor
To display Resource Reservation Protocol (RSVP) neighbor information, use the show ip rsvp neighbor
command.
Syntax Description ip-address
detail
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display RSVP neighbor information:
switch# show ip rsvp neighbor
Address
3.0.206.6
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1256
show ip rsvp neighbor [ip-address] [detail]
(Optional) IP address.
(Optional) Specifies the detailed neighbor information.
Modification
This command was introduced.
Interface RouterID
Ethernet1/7 1.1.1.6
Description
Protocol (LDP).
State Expiry LastSend
UP,RR 14 minutes 4 sec
Show Commands
OL-24994-01