Cisco Nexus 7000 Series Command Reference Manual page 396

show mpls traffic-eng topology
show mpls traffic-eng topology
To display the traffic engineering (TE) topology, use the show mpls traffic-eng topology command.
Syntax Description ipaddr
area
area
level-1
level-2
igp-id
isis
nsap-address
ospf
ip-address
brief
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the topology based on the IGP ID:
switch# sho mpls traffic-eng topology 10.1.1.1 brief
My_System_id: 0001.0001.0001.00 (isis-p1 level-2)
Signalling error holddown: 10 sec Global Link Generation 8402
IGP Id: 0001.0001.0001.00, MPLS TE Id:10.1.1.1 Router Node
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1318
show mpls traffic-eng topology [ipaddr | [area area | level-1 | level-2] igp-id isis nsap-address |
ospf ip-address ] [brief]
Interface IP address.
Displays the restricted output to an OSPF area.
Open Shortest Path First (OSPF) area ID as a decimal value. The range is
from 0 to 4294967295.
Displays the restricted output to an Intermediate System-to-System (IS-IS)
level 1.
Displays the restricted output to an Intermediate System-to-System (IS-IS)
level 2.
Displays the topology based on the Interior Gateway Protocol (IGP) ID.
Displays the topology based on the IS-IS IGP ID.
IP address.
Displays the traffic engineering topology based on the OSPF IGP ID.
IP address.
Displays the brief format.
Modification
This command was introduced.
Show Commands
(isis-p1 level-2)
OL-24994-01