Cisco Nexus 7000 Series Command Reference Manual page 267

R Commands
router-id
To configure the preferred interface for determining the Label Distribution Protocol (LDP) router ID, use
the router-id command. To return to the default setting, use the no form of this command.
Syntax Description
loopback
interface number
force
Defaults None
Command Modes
LDP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify the preferred interface for determining the LDP router ID:
switch(config)# mpls ldp
switch(config-ldp)# router-id loopback 2
switch(config-ldp)#
This example shows how to assign Ethernet 2/2 interface as the LDP router ID:
switch# configure terminal
switch(config)# mpls ldp
switch(config-ldp)# router-id loopback 0 force
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
router-id loopback interface number [force]
no router-id loopback interface number [force]
Specifies the loopback interface. The interface could be Ethernet or any
others.
Virtual interface number. The range is from 0 to 1023.
(Optional) Specifies to forcibly change the LDP router ID.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
router-id
1219