Cisco Nexus 7000 Series Command Reference Manual page 288

signalling patherr state-removal
signalling patherr state-removal
To delete a path state automatically when forwarding a PATH-ERROR message, use the signalling
patherr state-removal command. To return to the default settings, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled
Command Modes RSVP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to delete a path state automatically when forwarding a PATH-ERROR message:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling patherr state-removal
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1220
signalling patherr state-removal
no signalling patherr state-removal
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01