Cisco Nexus 7000 Series Command Reference Manual page 156

logging events all
logging events all
To configure the generation of system logs for all nontunnel TE events, use the logging events all
command. To stop logging these system messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Examples The following example shows how to configure generation of system messages for all nontunnel events:.
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging events all
switch(config-te)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1116
logging events all
no logging events all
Modification
This command was introduced.
L Commands
OL-24994-01