Cisco Nexus 7000 Series Command Reference Manual page 349

Show Commands
show l2vpn service xconnect all
To display the status information about the specified XConnect service, use the show l2vpn service
xconnect all command.
Syntax Description all
interface
name
peer
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the status information about the specified XConnect service:
switch# show l2vpn service xconnect all
switch#
OL-24994-01
show l2vpn service xconnect {all | interface | name | peer}
Displays all VPLS service entries.
Displays all services by the member interface.
Displays a specific service by its name.
Displays all services by the peer IP address.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show l2vpn service xconnect all
1271