Address-Family - Cisco Nexus 7000 Series Command Reference Manual

address-family

address-family
To configure an address family type that pertains to BGP, use the address-family command
default setting, use the no form of this command.
Syntax Description ipv4
ipv6
multicast
unicast
vpnv4
vpnv6
unicast
Defaults
None
Command Modes Router BGP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines VPNv4 and VPNv6 options require MPLS Services license.
Examples This example shows how to configure IPV4 multicast address family:
switch# configure t
switch(config)# router bgp 1
switch(config-router)# address-family ipv4 multicast
switch(config-router-af)#
This example shows how to configure IPV6 unicast address family:
switch# configure t
switch(config)# router bgp 1
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
14
address-family {ipv4 {multicast | unicast}} {ipv6 {multicast | unicast | labeled unicast }} {vpnv4
| vpnv6 {unicast }}
no address-family {ipv4 {multicast | unicast}} {ipv6 {multicast | unicast | labeled unicast }}
{vpnv4 | vpnv6 {unicast }}
Specifies an IPv4 address family.
Specifies an IPv6 address family.
Specifies a multicast address family.
Specifies a unicast address family.
Specifies IPv4 VPN address family.
Specifies IPv6 VPN address family.
Specifies a unicast sub address family.
Modification
This command was introduced.
A Commands
.
To return to the
OL-24994-02