Cisco Nexus 7000 Series Command Reference Manual page 280

signalling client batch-time
signalling client batch-time
To configure the client batch timer, use the signalling client batch-time command. To return to the
default settings, use the no form of this command.
Syntax Description
msec
Defaults None
Command Modes RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the client batch timer:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling refresh reduction
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1212
signalling client batch-time msec
no signalling client batch-time msec
Milli seconds.The range is from 100 ms to 2000 msec.
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01