Cisco Nexus 7000 Series Command Reference Manual page 167

L Commands
logging tunnel reoptimize
To configure the generation of system logs when a TE tunnel is re-optimized successfully, use the logging
tunnel reoptimize command.
Syntax Description This command has no arguments or keywords.
Command Modes TE interface configuration (config-te-if)
TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
This feature can be configured either for an individual TE tunnel or all the TE tunnels.
No system message is logged if the reoptimization attempt is abandoned before completion or if the
reoptimization attempt does not result in a better path than the current one.
Examples The following example shows how to configure system logs for an individual TE tunnel when it
successfully reoptimizes:
switch# configure terminal
switch(config)# interface tunnel-te
switch(config-te-if)# logging tunnel reoptimize
switch(config-te-if)#
OL-24994-01
logging tunnel reoptimize
Modification
This command was introduced.
number
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging tunnel reoptimize
1127