Cisco Nexus 7000 Series Command Reference Manual page 164

logging password rollover
logging password rollover
To enable password rollover events, use the logging password rollover command. To return to the default
setting, use the no form of this command.
Syntax Description
rate-limit
number
Defaults None
Command Modes LDP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable password rollover events:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# logging password rollover rate-limit 10
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1124
logging password rollover [rate-limit number]
no logging password rollover [rate-limit number]
(Optional) Specifies the rate limit logging.
(Optional) Messages per minute. The range is from 1 to 60 messages per
minute.
Modification
This command was introduced.
Description
Protocol (LDP).
L Commands
OL-24994-01