soo
soo
To configure the Site of Origin (SOO) Border Gateway Protocol (BGP) extended community value, use
the soo command.
Syntax Description
value
Defaults
None
Command Modes
config-router--vrf-neighbor-af mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure the SOO BGP extended community value:
switch# configure terminal
switch(config)# feature bgp
switch(config)# router bgp 1.1
switch(config-router)# vrf vpn1
switch(config-router-vrf)# neighbor 209.165.201.1 remote-as 1.2
config-router-vrf-neighbor)# address-family ipv4 unicast
switch(config-router-neighbor-af)# neighbor 33.0.1.63 remote-as 100
switch(config-router-vrf-neighbor)# address-family ipv4 unicast
switch(config-router-vrf-neighbor-af)# allowas-in 3
switch(config-router-vrf-af)# soo 1:1
switch(config-router-vrf-af)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1228
soo value
The value is in one of the following format:
•
•
The number ranges is from 0 to 65535 for a 2-byte ASN or 0 to 4294967295
for a 4-byte ASN.
Modification
This command was introduced.
autonomous system number (ASN)
IP address
S Commands
OL-24994-01