Cisco Nexus 7000 Series Command Reference Manual page 208

mpls traffic-eng administrative-weight
mpls traffic-eng administrative-weight
To override the Interior Gateway Protocol (IGP) administrative weight (cost) of the link as used in traffic
engineering (TE) path calculations, use the mpls traffic-eng administrative-weight command. To
restore the system to its default condition, use the no form of this command.
Syntax Description
weight
Defaults
The TE link administrative weight defaults to the IGP cost of the link
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to override the IGP administrative weight (cost) of the link:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# mpls traffic-eng administrative weight 20
switch(config-if)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1160
mpls traffic-eng administrative-weight weight
no mpls traffic-eng administrative-weight weight
TE administrative weight.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
M Commands
OL-24994-01