Cisco Nexus 7000 Series Command Reference Manual page 387

Show Commands
show mpls switching vrf
To display the Multiprotocol Label Switching (MPLS) virtual routing and forwarding (VRF) instance,
use the show mpls switching vrf command.
Syntax Description vrf name
Defaults
None
Command Modes EXEC
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the per VRF information:
switch(config)# show mpls switching vrf vpn4
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
In-Label
VRF vpn4
103
In-Label
492288
switch(config)#
switch(config)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls switching vrf vrf name
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Out-Label FEC name
None 92.168.4.0/24
VRF
vpn4
Description
Protocol (LDP).
Out-Interface
Eth2/26.4
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls switching vrf
Next-Hop
110.0.4.2
1309