show l2vpn atom
show l2vpn atom
To display the Any Transport over MPLS (AtoM) information, use the show l2vpn atom command.
Syntax Description
binding
fsm
summary
vc
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the AToM VC information:
switch# show l2vpn atom vc
Interface Dest Address
--------- --------------- ---------- ------ ------------------------ ---------
pw100002
switch #
Related Commands
Command
show l2vpn atom vc
detail
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1268
show l2vpn atom {binding | fsm | summary | vc}
Displays the AToM label binding information.
Displays the finite state machine counter.
Displays the summary of Layer 2 transport.
Displays AToM virtual circuit information.
Modification
This command was introduced.
VC ID
10.0.0.4
80
Description
Displays detailed information about Any Transport over MPLS (AToM)
virtual circuits (VCs) and static pseudowires that have been enabled to route
Layer 2 packets on a device.
Service
Type
Name
vfi
vpls-80
Show Commands
Status
DOWN
OL-24994-01