Echo Revision - Cisco Nexus 7000 Series Command Reference Manual

echo revision

echo revision
To specify the revision number of the echo packet's default values, use the echo revision command.
Syntax Description
3
4
Defaults 4
Command Modes config-mpls mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command requires an MPLS license.
Examples This example shows how to specify the revision number of the echo packet's default values:
switch# configure terminal
switch (config)# mpls oam
switch(config)# echo revision 3
switch(config)#
Related Commandss Command
mpls oam
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
140
echo revision{3 | 4}
Specifies the draft-ietf-mpls-ping-03 (Revision 2).
Specifies RFC 4379 compliant (default).
Modification
This command was introduced.
Description
Enters MPLS OAM configuration mode and customizes the default
behavior of echo packets.
E Commands
OL-24994-01