Cisco Nexus 7000 Series Command Reference Manual page 198
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
mpls ldp configuration
mpls ldp configuration
To configure the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP), use the
mpls ldp configuration command.
Syntax Description
This command has no arguments or keywords.
Defaults
Enabled
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
When MPLS LDP is disabled on the device, no LDP commands are available.
This command requires the MPLS Services license.
Examples
This example shows how to configure MPLS LDP:
switch(config)# mpls ldp configuration
switch(config-ldp)#
Related Commands
Command
mpls ldp sync
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1150
mpls ldp configuration
Modification
This command was introduced.
Description
Enables Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP) Interior Gateway Protocol (IGP) synchronization for all
IS-IS interfaces.
M Commands
OL-24994-01
Advertisement
Table of Contents
