Bfd Slow-Timer - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
B Commands
bfd slow-timer
To configure the slow mode timer for sessions, use the bfd slow-timer command. To restore the system
to its default condition, use the no form of this command.
Syntax Description
milliseconds
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure the slow mode timer for sessions:
switch# configure terminal
switch(config)# bfd slow-timer 1000
switch(config)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
bfd slow-timer milliseconds
no bfd slow-timer milliseconds
Slow rate timer in milliseconds. The range is from 1000 to 30000
milliseconds.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
bfd slow-timer
119
Advertisement
Table of Contents
