Cisco Nexus 7000 Series Command Reference Manual page 162

logging neighbor-changes
logging neighbor-changes
To log Label Distribution Protocol (LDP) neighbor state changes, use the logging neighbor-changes
command. To return to the default setting, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to log Label Distribution Protocol (LDP) neighbor state changes:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# logging neighbor-changes
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1122
logging neighbor-changes
no logging neighbor-changes
Modification
This command was introduced.
Description
Protocol (LDP).
L Commands
OL-24994-01