Ip Rsvp Authentication Window-Size - Cisco Nexus 7000 Series Command Reference Manual

ip rsvp authentication window-size

ip rsvp authentication window-size
To configure the tolerance for an out-of-sequence message on an interface, use the ip rsvp
authentication window-size command. To return to the default settings, use the no form of this
command.
Syntax Description
value
Syntax Description This command has no arguments or keywords.
Defaults 1
Command Modes
Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to specify the tolerance for an out-of-sequence message on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/1
switch(config-if)# ip rsvp authentication window-size 3
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
192
ip rsvp authentication window-size value
no ip rsvp authentication window-size value
Maximum number of messages allowed in receive window. The range is
from 1 to 64.
Modification
This command was introduced.
Description
Protocol (LDP).
I Commands
OL-24994-01