Unpack And Install The Chassis; Unpack The Chassis - Cisco Nexus 9804 NX-OS Hardware Installation Manual

Unpack and Install the Chassis

Note
•
•
•
•
•

Unpack the Chassis

Tip
Ensure that there is sufficient room around the chassis pallet for unpacking. For information about the chassis
dimensions and clearance requirements see, Clearance Requirements.
Carefully move the pallet containing the chassis to the staging area where you plan on unpacking it.
The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual
appearance and size may vary.
Unpack the Chassis, on page 17
Install Bottom-Support Rails, on page 18
Transfer Chassis to a Mechanical Lifting Device, on page 19
Mount Chassis Into the Rack, on page 21
Attach Front Door to Chassis, on page 24
Be sure to save the packaging in case you need to return any of the components products.
C H A P T E R
Cisco Nexus 9804 NX-OS Mode Switch Hardware Installation Guide
3
17