Cisco Nexus 7000 Series Command Reference Manual page 252
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
remote link failure notification
remote link failure notification
To enable Any Transport over MPLS (AToM) remote link failure notification and shutdown, use the
remote link failure notification command. To disable remote link failure notification, use the no form
of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to enable AToM remote link failure notification and shutdown:
switch# configure terminal
switch(config)# l2vpn xconnect context XCON1
switch(config-xconnect)# remote link failure notification
This example shows how to disable the AToM remote link failure notification and shutdown:
switch(config-xconnect)# no remote link failure notification
switch(config-xconnect)#
Related Commands
Command
l2vpn xconnect context Enters Xconnect configuration mode and establishes a Layer 2 VPN
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1204
remote link failure notification
no remote link failure notification
Modification
This command was introduced.
Description
(L2VPN) context for identifying the two members in a VPWS,
multi-segment pseudowire, or local connect service.
R Commands
OL-24994-01
Advertisement
Table of Contents
