Cisco Nexus 7000 Series Command Reference Manual page 217

M Commands
mpls traffic-eng tunnels
To enable Multiprotocol Label Switching (MPLS) traffic engineering (TE) tunnels on an interface, use
the mpls traffic-eng tunnels command. To restore the system to its default condition, use the no form
of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to enable MPLS traffic engineering tunnels:
switch(config)# interface ethernet 2/1
switch(config-if)# mpls traffic-eng tunnels
switch(config-if)#
Related Commands Command
interface tunnel-te
OL-24994-01
mpls traffic-eng tunnels
no mpls traffic-eng tunnels
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls traffic-eng tunnels
1169