Cisco Nexus 7000 Series Command Reference Manual page 155

L Commands
lockdown
To disable reoptimization of the label switched path (LSP), use the lockdown command. To restore the
system to its default condition, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Modes LSP attribute configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to disable reoptimization of the LSP:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# lsp attributes 1
switch(config-lsp-attr)# lockdown
Related Commands Command
mpls traffic-eng
configuration
OL-24994-01
lockdown
no lockdown
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
lockdown
1115