Cisco Nexus 7000 Series Command Reference Manual page 319
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show ip rip vrf
To display information about the Routing Information Protocol (RIP), use the show ip rip vrf command.
Syntax Description
vrf-name
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display information about RIP:
switch(config)# show ip rip vrf vpn1
Process Name "rip-test1" VRF "vpn1"
RIP port 520, multicast-group 224.0.0.9
Admin-distance: 120
Updates every 30 sec, expire in 180 sec
Collect garbage in 120 sec
Default-metric: 1
Max-paths: 8
Process is up and running
Interfaces supported by ipv4 RIP :
Redistributing :
switch(config)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ip rip vrf vrf-name
VRF name that is any case-sensitive, alphanumeric string up to 32
characters.
Modification
This command was introduced.
bgp-65536
policy bagpipe
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rip vrf
1241
Advertisement
Table of Contents
