Interface Pseudowire - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
I Commands
interface pseudowire
To enter interface pseudowire configuration mode and configure a static pseudowire logical interface,
use the interface pseudowire command. To delete the pseudowire interface and the associated
configuration, use the no form of this command.
Syntax Description
pw-id
Defaults
None
Command Modes
config-if-pseudowire configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to enter interface pseudowire configuration mode and configure a static
pseudowire logical interface:
switch# configure terminal
switch(config)# port-profile type pseudowire AToM
switch(config-if-prof)# encapsulation mpls
switch(config-pseudowire-mpls)# interface pseudowire 100
switch(config-if-prof)#
This example shows how to delete the pseudowire interface and the associated configuration:
switch(config-if-prof)# no interface pseudowire 100
switch(config-if-prof)#
OL-24994-01
interface pseudowire pw-id
no interface pseudowire pw-id
Pseudowire ID. The range is from 1 to 200000. The range for a static
pseudowire is from 1 to 8192.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
interface pseudowire
181
Advertisement
Table of Contents
