Cisco Nexus 7000 Series Command Reference Manual page 363
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show mpls ldp igp sync
To display the configuration status of the Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP) Interior Gateway Protocol (IGP) synchronization on the specified interface, use the show
mpls ldp igp sync command.
Syntax Description
interface ethernet
slot/chassis number
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the delay time configuration for the MPLS LDP and IGP
synchronization on the specified interface:
switch# show mpls ldp igp sync interface ethernet 6/1
switch#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls ldp igp sync [interface ethernet slot/chassis number]
(Optional) Specifies an Ethernet interface.
(Optional) Slot or chassis number. The range is from 1 to 253 characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls ldp igp sync
1285
Advertisement
Table of Contents
