Cisco Nexus 7000 Series Command Reference Manual page 382

show mpls switching interface
show mpls switching interface
To display the information for the specified outgoing interface, use the show mpls switching interface
command.
Syntax Description slot/port
detail
vrf
vrf name
Defaults None
Command Modes EXEC
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the information for the specified outgoing interface:
swtch# show mpls switching interface ethernet 6/1 vrf vrf1
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1304
show mpls switching interface {ethernet slot/port detail vrf vrf name vrf vrf name}
Slot or port number. The slot range is from 1 to 253 and the port range is
from 1 to 128.
Displays the detailed information.
Displays the virtual routing and forwarding (VRF) instance.
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01